Wednesday, 8 May 2013

Kitbash Part 7 - VTOL Shuttle.

A while ago I picked up a real bargain at Modelzone. It was a Bigtrak Jr. on the reduced shelf because it was faulty and was missing a part. As it turned out, the missing part was a rubber ring around one of the wheels that gives it traction when it's moving. The fault was that it went round in circles - obviously because only one of the wheels had any traction. It usually retails between £29.99 and £34.99 depending on where you see it. This was marked down to 99p! I snatched it up, if only so I could cannibalise it for bits!

Bigtrak Jr
Originally I was going to stick some weapons on it and use it as a big battle wagon for maybe my Felids or Protolene, but then AGG gave me some of her old Ventolin inhalers for my bits box. I had one on my desk and was idly playing with it whilst I was on the phone one day when I noticed that the ends looked a lot like steerable nozzles:
Inhaler
Jump jet nozzle?
After this revelation I decided to convert the Bigtrak to a VTOL lander of some kind. It then lay dormant for a while as I waited for AGG to use up sufficient Ventolin inhalers for the project to proceed.

We've just had a long weekend here in the UK, and I took advantage of it when AGG delivered a bumper crop of inhalers. The Bigtrak got bathed in Dettol overnight to remove the stickers and glue, and then lightly sanded all over. I blanked off the rear deck with some 1.5mm plasticard, and did the same to the two side sections, after carefully sawing off the fixed axles at the rear.

I then cut down and cleaned up the inhaler nozzles and marked out their positions to make sure they would all line up. After they were added I was going to add some GZG building accessory large doors to the side, but instead remembered I had some large cargo doors by The Scene (although having just looked on their website, I can't find the doors, so maybe it was someone else). I split these down the middle and added one to each side as a loading ramp. I then tried to add some detail to the hemispheric dome at the top by adding  cockpit windows from thin strip styrene. This went badly, and every window I cut seemed to be a different shape and end up in a different place. I picked these all off and sanded the dome smooth again from where the superglue had mashed it up. Instead I bent some metal windows I had to match the curve of the hull (it curves in both directions, so this was quite a trial):


I then added additional bits and pieces from the bits box, including windows and Hatches from The Scene, vents, hatches, radar domes and circuit boxes from GZG and various other odds and ends.


The landing gear was scratch built from some left over IMEX Platformer connectors  with styrene tube and rod added for the legs and hydraulics. Detail was then added with small strips of styrene. The red transparent and purple thing on the upper hull needs to have some filler added around the edges to blend it in a bit more - it's going to be another sensor dome of some kind.


The engine bells are the caps from the inhalers with wheel rims from the re-purposed Androidz pull-and-go motors. I also just noticed my camera was on the wonk when I took the above photo - the ship actually sits level.



Seconds after I glued the top and bottom hull sections together, I noticed the hole left behind by the on/off switch. I was looking for something to cover it over and dropped one of the Platformer pieces in the hole whilst I was offering it up to check the size. I then spent 30 minutes trying to rattle it back out of the hole. In the end I had to grab it with my side cutters through the hole and cut it into smaller pieces to get them out...


As you can see, it's a substantial beast. I deliberately didn't/t arm it, as I see it more as a civilian cargo/passenger lighter. I'm going to TRY to paint it with a weathered, battered kind of look, with plenty of bumps and scratches, as though it's had a long, hard life. A basic grey/white look, with maybe some red and yellow details on it. The kind of look I'm going for is something like the battered aesthetic in the new Battlestar Galactica, or the hunk-a-junk, lived-in look of the Millennium Falcon.

Tuesday, 7 May 2013

Salute Loot

I attended Salute 2013 at the Excel centre in London last weekend. I failed to take a single picture, but many of my co-bloggers have written fine write-ups. I'd point you to The Angry Lurker and Wargaming Girl for two with plenty of pictures.

I managed to pick up a few bargains at the show, and came away well within my budget, which was nice. All images below are from the respective vendors websites (aside from the first one, obviously).

First off are some extra laser cut 15mm pre-painted building from 4-Ground Designs. I managed to get these at a show discount of 20% off, which was nice. I've also had some super service from 4-Ground in that our new puppy, Buster the Destroyer (title added by me), a springer spaniel, managed to get hold of the roof of one of my previously constructed building and chew it up. I contacted 4-Ground and they have generously agreed to send me a replacement!
Buster The Destroyer and AGG. Buster on left.
I picked up the semi type 2 and terrace type 2 as well as the stone walls set. Very nice buildings that fit together well, and once you have the hang of construction, go together quickly and easily. I plan to use them for Bolt Action in 15mm with my old, re-based Flames of War figures. Next pay packet I'm going to pick up another couple of sets, probably the shop and terrace type 1.



I also picked up a bargain haul of  Uncharted Seas ships from Spartan Games. One of the dealers, and to my annoyance I didn't remember which one, was having a clearance sale on all their Uncharted Seas stuff. I got Shroud Mage starter and Orc Starter (second wave of models) for £10 and £15 each, both at least 50% off. I also picked up a brace of blister packs as well at between £3 and £6 each, again, savings of between 25% and 50%. I was most chuffed with this. I have decent sized Orc and Shroud Mage fleets, and these will bulk them up nicely.














My next set of purchases were from Ground Zero Games. Some of their new Ranger and Rover vehicles, which will be painted for civilian use as explorer and survey vehicles. I also picked up one of the Fan Vans, which I have been lusting after for a while. This will get painted in the same grey/Blue as my other security vehicles.








Next I picked up some bits and pieces form Antenociti's Workshop. First was a pair of Zebu Patrol cars, once again for my security forces. These are really nice little miniatures full of an amazing level of detail and character. I really like them. I also picked up some of the Medium Advertising Screens and plasma screens, which are designed for 28mm, but work just fine for 15mm. They include some nifty graphics to attach to the screens showing nicely hi-tech and futuristic displays.



Lastly I picked up some of the Star Marines and Praesentia RAL Phase Shifters 1 and 2 from Critical Mass Games. I also got a set of their MaskFX sheets with Hexagon shapes on them, which I am really looking forward to using on my ZAS forces from their recent Kickstarter.



A nice haul of loot which I am really looking forward to painting up and gaming with.







Monday, 25 March 2013

Full Thrust FSE and NAC kitbashes

A long time ago I bought some of GZG's excellent Full Thrust miniatures to use as Sathar and UPF forces in a game of Star Frontiers inspired Starmada (and, if Star Frontiers is something you are familiar with, check out Star Frontiersman, an irregular e-zine that covers all things Frontier - I also did some artwork for them).

There are official Star Frontiers miniatures out there, but the line is OOP, small and they are notorious for lead rot. Finding suitable proxies from GZG seemed much easier.

For the Sathar ships I used the old style NAC, as the rounded prow sections looked like the images of Sathar ships on the old Knight Hawks counters, sort of. The Sathar only had 5 classes of ship, frigate, destroyer, light cruiser, heavy cruiser and carrier, so I only bought 5 types of ship.



With the recent purchase of a new style FSE battle group I decided my old Sathar needed a bit of a spruce up and to be reclaimed as the NAC again. With the old moulds out of production, and the new range of NAC ships quite stylistically different I was left with one choice - kitbashing!

Four of the five ship classes got a modification, plus a new class was created from some left over bits. I had been using battle cruisers as escort carriers, but have since picked up a  fleet carrier, so I now have:

Corvette
Frigate
Heavy Frigate
Destroyer
Heavy Destroyer
Light Cruiser
Escort Cruiser
Heavy Cruiser
Battlecruiser
Battleship
Fleet Carrier

I also have some Strikeboats and Lancers that are yet to be painted.

The frigates were a simple modification. A short section of square styrene was added to each side . Styrene strip and rod were added for detail to create a heavy frigate.

Original frigate on the right

For the destroyer mod I removed the engines from one destroyer, and filed the surface flat. A second destroyer had the bridge and gun turret removed and the edge filed flat. The two sections were glued together to create a "stretched" destroyer. The gun turret was glued back on at the rear, and a section of styrene rod with a small aluminum tube was added to the side. This created my heavy destroyer or beam destroyer.

Original destroyer on the right

The light cruiser had a couple of bitz box additions in the form of a spare ammo clip from a VOTOMS model with a couple of sections of styrene rod and a 6mm gun turret. This can serve double duty as either a strike cruiser or escort cruiser.

Original light cruiser at top
 I didn't do anything to the heavy cruisers, as I only had a couple of them. One of the battle cruisers that I had been using as assault carriers had an additional superstructure added from a bitz-box turret off the 6x6 VAB , a Tau shield generator and some small sections of styrene rod to add detail. I also added another two 6mm weapon turrets as beam generators. Short sections of styrene tube were also added next to the existing engines to create a battleship.

Original battle cruiser on the right
 The corvette was created by taking the spare section of forward destroyer hull left over from the heavy destroyer mod and adding a few small pieces of styrene rod to the rear section to create engines. The same 6mm turret as used on the escort cruiser was added to the top.


With the addition of the fleet carrier, strike boats and lancers, I should have a sizeable and flexible force of ships.They are all going to get a fresh coat of paint, and I'm in two minds of what colours I should go for. Part of me is thinking a nice sea grey, but I have some NSL ships that are base coated in dark grey, and I'd like to keep the fleets with distinct colours. My UNSC are in light blue, the FSE in Blue/white (see below), pirate/raiders in red and a few New Israeli ships in tan. I might go for a NATO Green and black stripe pattern similar to modern British armour.

In addition to the NAC ships, I also recently picked up a starter fleet of FSE ships just before Christmas. With any of his Christmas orders, Jon at GZG often adds in a few extra surprise models, and this was no exception. I got a flotilla of strike boats, an escort cruiser and a pair of corvettes as my Christmas freebie. Thanks Jon!

The ships were assembled with Filla Glue medium - by far the best superglue I have used. It's not too thick and binds very strongly and can be used vary sparingly. The only criticism I have is that every bottle I have used has had the end of the cap snap off, meaning I have to jury rig some cind of stopper for the bottle and inevitably end up with a gummed up mess. I get mine from the ever usefull Antenociti's Workshop, and have purchased some spare bottles this time for the donor caps!

The ships were then under coated with GW Skull White as a basecoat. A very, very thin wash of an old pot of ghost grey was then applied to bring down the stark white. Individual panels were then picked out again in  skull white and the new (ish) GW Ceramite white (a very white white - if you know what I mean). The outer panels were then painted with Mordian Blue and the edges highlighted with a mix of Mordian blue and Lightning Bolt blue (a dreadful mix - original paints and foundation paints do not play well together). The engines got a coat of 50/50 Codex Grey and black with Dwarf Bronze details added here and there. Sensors and weapons were then picked out in Leadbelcher with a Chainmail highlight and finally stripes of chaos black with sunburst yellow dots were added here and there for windows.

All of the ships were then glued to Litko flight stand peg toppers (available in the UK from Figures in Comfort) and given two coats of GW Purity Seal followed by a coat of Testors Dullcoat.

Top row: Corvettes. Bottom row: Strike boats
Light cruisers
L to R: Heavy destroyer, destroyer, heavy frigate, frigate
Heavy Cruiser
 I have since picked up a couple of escort carriers, which are very nice models, plus suitable fighters.as well.

Tuesday, 19 March 2013

Androidz re-purposed.

A while ago I showed you the bargain bin Androidz toys I picked up with a view to re-purposing as 15mm mechas. When last we saw them they had been modified slightly and I advised I had painted them. They've now been completed and weathered as well.

The first of the two is a Security mech. He got a GW Mordian Blue and Astronomicon grey (I think) two-tone paint job, with bits and pieces of black here and there. Decals are from GZG (The UNSC flag) and Fighting Piranha.





The second is the Ash Wastes mecha, which got an Adeptus Battlegrey and Charadon Granite colour scheme, blended with Caltharn Brown and Dheneb stone. Metallic parts are Leadbelcher with old chainmail highlights (my old chainmail - from the original Citadel Paint Set is now a very, very shiny silver and great as a highlight colour)





They are OK, I guess, but their origins as toys are worn very close to the skin. I like the clunky aesthetic of them, and they remind me a bit of the very first Fury and Eddy Dreadnought armour that Games Workshop brought out years ago - better than the boxes on legs that they have now. I could have spent a lot more time cleaning up the mould lines and filling in gaps, but they were meant as a quick experiment to see what I could make of them, not meant to be compared to my other mid-scale mecha from Rebel, CMG and so on. Viewed in that light, I'm quite happy with them.

To continue with a theme, I've also statted them up for Gruntz:



Wednesday, 13 March 2013

Kitbash Part 6 - Ka-299 "Hexen" Assault Transport

Back in August last year I started work on a kitbash of a Revell 1/72 Ka-29 "Helix" helicopter kit, to turn it into a squad-lifter/dropship for my NKDF 15mm forces. I've now finished and am pretty pleased with the results.

Lots and lots of MicroSol and MicroSet were used to get the transfers to conform over the rivets - especially on the  rudders.

The actual finish is a good deal duller than the photos suggest - I'm still not getting the best from my lightbox.

Decals are a mixture of the ones from the kit, Fighting Piranha and 1/100 Gundam Detailing sets 

The donor kit, the Ka-29, is an assault transport with capacity for 13, which makes it ideal for a medium sized 15mm ship.

The nozzle on the rear of the tail boom is on gimbals and rotates to provide directional control whilst hovering. 

Side mounted lift engines 

Underside view showing lift engines and bombardment turret

Weathering on the nose and intakes works particularly well, I think.

The original kit was a Revell 1/72 Ka-29 "Marine". The side mounted lift engines were from Micropanzer/Combat Wombat and, I think, are now OOP - which is a shame. The large podded engines are from a Revell Easykit A-10 and the Radome that covers the rotor hole is from an Easykit AH-64D Apache Longbow. The bombardment cannon is an Old Crow twin autocannon turret.

Edit: A couple of people over at TMP asked for pictures with some 15mm minis for scale:




I've also statted it our for Gruntz: