Combat Wombat Assault Lander and Kitbashes

Another round of VTOL 15mm goodness.

First up is the Combat Wombat Assault Lander. Scotty at Combat Wombat very kindly sent this to me along with the missing pod from the first of my Bullfrogs - he's a clearly a gent of impeccable taste and refinement so I encourage you all to order oodles of his fine wares.

The combat Lander comes in 7 resin parts and 1 turned brass barrel for the nose mounted gun. The resin parts are three landing legs, the main body, two engine pods and the chin turret. There was some flash and a few bubbles on the model, but nothing that a few strokes with a file couldn't clean up, although I was rather brutal with the delicate edge of the engine intakes on one side and erased some of the raised detail. My own fault entirely.

All the parts fitted well together with minimal sanding to get the engine pods square. The gun required a small hole expanding in the chin turret to take the turned brass barrel. 

I have added a pair of missile pods to the sides to give the Assault Lander some extra teeth. The ship very much reminds me of the Raptors from the new Battlestar Galactica, and I recall there were several episodes where the normally unarmed Raptors were loaded up with missiles. The pods are actually made from a pair missile turrets designed for 6mm miniatures from Old Crow.

You can just see a chip in the resin of the lower corner of the canopy from my clumsy handling (or more accurately clumsy dropping).

Overall the assault lander makes for a really nice little model. It's generic enough that it could fit into a near-future game as an aerodyne or VTOL lander of some kind, a space opera or star-trek style game as a shuttlecraft or even some sort of combat lighter for a GrimDark game if you choose.

Next u is a kitbash of a Revell KA-50 Hokum snapfix kit.

I originally picked this up when Hobbycraft was closing down to use in Battlefield Evolution: Modern Combat as a proxy for a Chinese helicopter gunship. First game out I was chiding my nephew about being careful with his M1A2 Abrams tank models so as not to damage the delicate aerials on them when I turned around and knocked the unfortunate helicopter to the floor, snapping it's fiendishly complex contra-rotating rotor blades off and dislodging the cannon, never to be seen again. Much hilarity ensued.

Since then the chopper has languished in the bitz box. I eventually got around to doing something with it. Antigrav pods are the breech units of some spare weapons from the CMG Blackguard Mecha. The barrels have been chopped off and sanded down to leave the ribbed pods. I have some detailing parts on the way from Japan that I will use to add errr... detail to the pods before painting. Other bits include a spare cannon from my CMG ZAS tanks , rocket pods from Rebel Miniatures and spare missile clusters from Clear Horizon Miniatures excellent Raven VTOL.

I have to add the details as mentioned above, plus do some gap filling before she'll be ready for painting. I think the final decision on if the kitbash has worked will only come after she's been undercoated. At the moment the yellow/brown/green camo pattern looks juts too toy like. Watch this space.

Next we have a platoon of hovertanks kitbashed from a Battlefront PT-76 platoon that I got half price at SELWG this year (bargain!)

I have put the tracks in the bits box and replaced them with VTOL lift engines from Micropanzer. When I contacted Jason he originally had the lift engines as resin pieces and I wanted to check he'd be OK to cast up 50 of them (8 per tank plus some spares, 'cos who knows when you'll need a VTOL engine). Jason advised he was now able to produce them in metal and 50 would be no problem. As it happened I used 9 on each of the tanks anyway, so the spares came in handy.

Shots on my painting table. Sorry about the mess (flips a coin to the bartender...)

Each of the tanks got 4 lift engines on either side plus an upturned one on the rear as a drive engine. The engines had a gentle sweep down to a point behind the duct which I had to cut away. You can actually see the same piece in use on the Bullfrog Lander  from Combat Wombat as a lift engine in my previous post. I believe this is a result of Scott and Jason working together on some designs in the past.

I was originally going to replace the Battlefront supplied 76mm cannon with a 4mm steel ball bearing and a small disk of styrene to make a short barreled laser emitter, but instead I used another of Scott at Combat Wombats turned metal barrels. With just a short pilot hole drilled these fitted perfectly. I also added a pair of missile launch tubes from a die-cast toy and relocated the Dshk heavy machine-gun.

The turrets were affixed using the supplied 2mm rare earth magnets. I even managed to get all the polarities round the right way so any of the turrets could be used on any of the tank chassis.

I've also added flight-stand toppers from Litko (available from Figures in Comfort in the UK) which I find to be an excellent way of supporting most flying things. I use them on my Full Thrust ships, Tumbling Dice 1/600 aircraft for Air War: C21 and as flying stands for various 15mm. I've also chopped some stands down to give a grav-floater effect, as you can see in the group shot below.

Salute Loot

Yesterday was the 2014 Salute wargaming show, held at the Excel centre in London's docklands. It's only 20 minutes away by car for me, so I try and make it every year. This year I was joined by my brother and his wife and their 2 month old daughter. I was please to see that my brother was introducing her to wargaming at a young age. I fully expect her to be painting her first 28's within months.

The Excel venue is a great one for shows of this type, with good transport links, plenty of space and only moderately overpriced food and drink outside the halls. The car park that I usually use, outside the East entrance, was closed for coaches this year, so we were directed into the labyrinth under the venue. Random closures of certain parts made this a real maze, and I drove around fr about 20 minutes trying to find a parking space.

Eventually we managed to get into the hall just before 1pm, by which time all the freebie bags were gone, so I didn't get an of the nice give-aways like the Salute figure, which is a shame. I also thought that the hall seemed darker this year than previous years, but that could just be my failing eyesight. There seemed less gamers there than previous years, and I noticed a few empty tables. The lack of a bring and buy this year possibly contributed to the more spacious feel, as the stores were a little more spread out, which was a welcome change.

I didn't take any photos at the show, but there are some excellent galleries here, here, here and here. I was particularly impressed by the Sword Beach display, and the 1950's Vietnam board. The VSF board on Mars and the IHMN Lost City board also looked great. Unfortunately, because we arrived late, it was the first year that I didn't get to see everything, and missed some of the really good boards that you can see in the links above.

So, onto my haul. All the pictures below are straight from the pack, so include flash and sprue and are unassembled or glued.

 

Firstly, we have a freebie figure that I got from an interesting looking range soon to be launched by Spectre Miniatures. The range appears to be a modern/near future set in the dark, dangerous and sweaty world of unstable African countries. The figure is a CIA agent, and if the rest of the range is of similar quality they could be worth looking out for.

Next we have a collection of miniatures from Ground Zero Games

Firstly we have the Crusty attack bugs and handler. These are really nice giant attack prawns, and crusty with forked stick to prod them towards their enemies. I can see a whole host of uses for the attack prawns, and they are very nicely made, as ever.

Next we have a set of NSL heavy weapons, an autocannon on wheeled mount, grenade launcher on wheeled mount and RAM mortar. All nice, clean sculpts that will add a bit of punch to my Militech forces for the 4th Corporate War game.

I also wanted to pick up some Crusty light cruisers. When I placed an order with GZG after Christmas using my discount voucher, I ordered 4 sets of Heavy Destroyers by mistake instead of 4 light cruisers. Due to a picking error yesterday, I ended up with 2 more heavy cruisers and 2 light cruisers instead of the 4 light cruisers I wanted. I'm destined never to get my light cruiser squadron...

Light on left, heavy on right.

Next we have some really nice civilian vehicles from Critical Mass Games. I picked up a pack of the anti-grav cars and the anti-grav vans. The vans will make really good proxies for AV-4's (aerodyne vehicles) for the 4th Corporate war game, and the I'm going to convert a couple of the cars to be police cruisers by the addition of a styrene lightbar on the roof. I also picked up a Ravager Mech, but as it's in parts, didn't bother to photograph it.

Next we have a single pack of Arthurian Personalities from West Wind Productions Arturian range. These are a really nice set of Arthur, Merlin , Bishop and Owain, who I assume is Owain Ddantgwyn. Really nice figures, especially Merlin leaning on his staff. He just cries out for some faded blue tattoos on his arms.

Next we have a pack of Wargames Foundry figures from their unreleased range. These are a set from the Egyptian Adventures, which are essentially figures from the movie "The Mummy" and "The Mummy Returns". This set recreates the fight in the throne room between Nefretiri and Anacksunamun (his daughter and his mistress). It's a a nice set of figures which I will be using to bolster my Servants of Ra forces for In Her Majesty's Name.

I seem to recall a distinct lack of boobies in the film...

Next up we have some casualty dials from Warbases. Warbases are my go-to service for bases, counters and various other laser cut MDF bits and bobs. They make some nice dark ages buildings which I have just purchased, and they also did the custom order for the large hexes for my micro forests. The casualty dials are really simple, just disks with a window cut into them and a rotating dial with numbers on it. at 60p each, these are a bargain and will be useful for a number of games including Bolt Action, Chain of Command and Dux Brittanium..

I finally picked up a set plastic of hills and escarpments from Kallistra, which I have been uhmming and ahhing over for the last 4 or 5 shows I've been to. They should paint up nicely, and when flocked to match my table will provide a nice alternative to some of the crummy polystyrene pieces I have. The ones below are the smallest pieces of the small, medium and large that you get in each set.

Finally, and my last purchases of the day, we have a few bits from Brigade Models. Firstly we have two sets of their powered armour, which will again be used for my 4th corporate war game, in this case a Militech Commando PA suits. They'll also do double duty as French BH-21 PA suits for a 2300AD game set on Aurore. Very nice models, but the details on the weapons seem a bit soft. Perhaps this is the age of the mould or maybe I just got a slightly rough batch. I got one set of the regular suits, and one set of the heavy weapon suits armed with a mix of rotary cannons and bazookas.

 I also picked up a couple of sets each of their new fleet scale British Fighters. The detail on these really is remarkable. You can even make out the cockpit canopy frame on them, which is a major achievement for a miniature less then 6mm in length. This is clearly a positive result of CGI design and 3-d printing.

The bars on the tail are sprue, but could easily be turned into a rear air-foil to give you a Vampire/Vixen twin boom vibe.

With handy 15mm figure for scale

So, overall quite a nice haul. There were a couple of things I looked at but didn't get, the raiders expansion for Dux Brittanium and some of the new plastic tribal Orcs. I forgot to get some Longhorn fighters from GZG and I also picked up some Northwind and Foundry Arabs for my brother for his birthday present. I managed to stay just within my budget, and resisted the temptation to spend it all on buying every X-Wing ship I could see.